Specialty Fleet

Information

Machine Overview:
• EZ Hauler Track Unit, Self-storing Auger, hyd. 3rd stage boom, pole guide & front telescopic outriggers. Remote drive and throttle controls, two speed drive, Yanmar 3 cyl. Minimax Tier IV Final engine
• 5500LP EZHauler crane per SDP specs.
• Yanmar Minimax Diesel Engine, Tier IV Final
• 33rpm @ 3500 ft. lb. Torque Auger drive head, (2" hex output shaft)
• 25 FT. cable for CAN/Charger for orange "joystick" remote control transmitter. Charges while operating from direct connection
• Hydraulic Pole Guides
• Track Interlock Safety System
• Battery
• 5’ Hex Variable Length Extension (Kelly Bar)
• 18” Auger Bit with Roll-Up Guide, Carbide Teeth, Wind Up Stud & Fishtail Point
• 9/16 x 100’ Winch Rope
• 3-Position detented, 4-way, manual, lever operated, hydraulic valve relief both ports, adjustable from 1500-3000 psi
• Auger Store on Side of Boom
• Stable to 20 Degree Slope
• Operator & Parts Manuals

General Specifications:
• Engine: Yanmar Mnimax, 3 Cylinder, Water cooled 1640 cc Diesel 25 HP @ 3600 RPM. Fully tier IV compliant
• Hydraulic Pump: Fixed displacement gear type, 14 gallons (53 liters) per minute
• Drivetrain: Hydraulic track drive with skid steering
• Rubber Tracks: Hydraulically extended tracks
• Sheave Height: 42’ Boom Tip
• Rotation: Full 360 degree continuous rotation
• Lifting Capacity: 5500 lb. (1725 kg)
• Remote Control: Fully proportional for crane and drive functions
• ANSI: Meets or Exceeds A92.2-2001, A10.31-2006, and SAE Requirement
• Insulated: Meets 46kv category C dielectric qualifications

Dimensions:
• Chassis Length: 10’6”
• Overall Length Including Crane: 17’
• Width-Tracks Retracted: 35.5”
• Width-Tracks Extended: 51”
• Height: 6’10”
• Track Length: 7’
• Track Type: Rubber (Black)

Additional Options:

Pin-On Bucket Assembly:
• 24x24x24 Fiberglass Bucket with Step Access
• Leveling System with Outrigger Interlocks
• Bucket Liner (Rated at 50KV)
• Vinyl Bucket Cover
• (Qty: 4) 16” Outrigger Pads with Hand Hole Cutouts
• Pin-On Fiberglass Bucket Assembly Jib
$ 11,250.00

Pin-On Transformer Jib with Winch:
• Transformer Jib with Hydraulic Winch
• Requires Tool Circuit & Hose Reel(Pricing Below)
$ 12,500.00

Tool Circuit & Hose Reel:
• Lower Tool Circuit with Hose Reel
$ 2,600.00

Support Trailer:
• 21’Long, 8’ Wide- 17,500 GVWR Tandem Axle Trailer
• 8 Lug EZ-Lube 9,000lb Axles
• Vehicle Identification Number
• 10K Capacity Drop Leg Jack
• Aluminum Tool Box: 60” Long, 18” High, 10” Wide with 2 Lock Hasp & Paddle Latch
• 12 Gauge Diamond Tread Plate w/10” Skirt Fenders
• 6 Pole Pigtail Trailer Cord
• Tie Down D-Rings
• Spare Tire Mounting assembly with Tire & Rim
• Pin-On Fiberglass Bucket & Assembly Jib holder
$ 15,500.00